Taifun GTR RTA
Innovative Air Flow Control
The Taifun GTR has two separate air channels. In the basic version, the cross sections of the channels are 1.0mm and 1.2mm in diameter. By means of the ball bearing detent supported AFC ring, either both channels can be opened completely or half each individually, or together completely or half respectively.
The AFC ring of the Taifun GTR has a stop in both directions. However, the intelligent arrangement of the air holes does not result in a setting from small to large. Rather, the adjustment is kept as short as possible and the outer opening is always exposed with one click to the right or left (depending on the selected air hole), halved, or closed. To save height, the knurled AFC ring also serves to assemble/disassemble the atomizer. The possibilities of the AFC allows for a larger air flow bandwidth in the restrictive vaping range without much effort. Both lovers of a classic restricted MTL experience and users of a very restrictive DL vape can tune the air supply to their personal needs without having to suffer compression losses under the coil.
Next Generation Variable Liquid Flow Control
The Taifun GTR is designed for versatile use in the restrictive vaping range. This is reflected in the new arrangement of liquid flow control.
While one user may use lower viscosity liquids with less power and high vacuum, another may use thicker and more viscous liquids with more power and more air. To meet these requirements, a liquid control needs to be able to adapt to the individual needs of the users to a certain extent. Just turning it up is not enough for a satisfying vape experience in the area of MTL and restrictive DL.
The left side liquid channel is optimized for 50/50 liquids with restrained performance and greater negative pressure in the chamber. Due to the narrower and higher rise channel, the chamber is not flooded in the aforementioned conditions.
The right channel, with its wider milling and lower riser height is suitable for 70+VG liquids with increased travel performance. With longer draw duration, both channels can also be opened for greater liquid flow. The liquid control is set by a simple and easy rotation of the deck. 4 recesses for the two-sided access allows a very short rotation in the circumference, no matter where the approach of the thread begins.
Keeping It Simple
The coil deck of the Taifun GTR is the logical progression of the “Taifun Deck” launched with the GT IV. The posts are similar to those of the Taifun BTD with improved wire slots for easier wire installation.
The two-sided ventilation introduced with the Taifun GT IV has also been adapted to the requirements of a pure-bred restrictive atomizer. Both air ducts emerge slightly diagonally underneath the winding and allow a variable setting of the coil to the respective needs of the user in terms of taste and throat hit.
In principle, the Taifun GTR is also a “keep it simple” design. The deck does not require any great coil winding skills or cotton laying techniques for an optimal vaping experience. Simply install the coil, pull through the cotton wick and enjoy your vape. Simple as that.
- Diameter: 23mm
- Height: 40mm (without 510 drip tip)
- 510 drip tip (Stainless Steel)
- Materials: Stainless steel 1.4301, PEEK, PSU
- Adjustable AFC via 2 holes with 1.0mm and 1.2mm diameters
- Taifun GTR RTA
- 510 Drip Tip
- Spare Parts Bags
- Operation Manual
Taifun GTR Manual:
<< Taifun GTR Manual Download Link >>